Well like I said last week rods 001 and 002 are in the books. I'm planning on taking a little time off building, but I seem to have the bug and I'm already thinking about 003.

Knowing that I'll get a lot of different responses, I'd like to get some suggestions for what taper to pick.

My first rod was a PHY Midge (#2 was a gift for someone so I won't comment on it). I picked the Midge because I didn't expect the first rod to turn out that well, and wanted try a more all a round useful rod when I had more experience.

So, I'm looking to build this next rod for myself. As I've said a few times earlier I'm very new to fly fishing. For right now all of my fishing will be done in Northern Lower Michigan and the Upper Peninsula on rivers like the Jordan, Pigeon, Fox, Escanaba, Ontanogon, etc. I'd like to build an all around type rod that I can use in a variety of situations (dry and wet flies, nymphs, small streamers, etc.) I'm thinking of a 5-6 weight probably 8 feet (2 or 3 piece). I'd like a tried and true taper. As far as action goes, I don't know. All I've ever really fished is a couple of graphite rods, which I found to be okay at longer distances but extremely difficult in close on some of the smaller spots I find myself in.

If I were a client, what taper would you suggest? If you could include a couple of sentences about why I would appreciate it.

Also, later this spring I plan on building a little bigger rod to use for larger rivers or maybe for hex fishing which I've never done. (Aaron Gaffney)

I love the Dickerson 7613 as an all around 5-6 weight rod.

Also, it's more or less native to your local waters.

It's 7'6" and uses a 13# ferrule. I have build five of these and everyone who has one loves it.

You can find the taper all over the web. For instance here.

For a bigger rod, I love the Dickerson 8015 Guide Special (8' 7 weight rod).

Try the 7613, it's a great rod. (Patrick Mullen)

I'd suggest that you consider the Para 15, lighter tip. (Grayson Davis)

Very interesting. The two replies that have come through so far would have echoed both of my choices. For a 5 wt, I'd go with the Dickerson 7613. I've made 3 so far and all of them have been really nice casters. On the larger rod, I'd pick the Para 15, any version, including the version modified by Wayne Cattanach called "The Force."

Can't go wrong with those tapers, just keep in mind that you'll have to work with the Para's as they're a little different than some of the rods out there. Not bad, just different. (Todd Talsma)

You want a 7'6" for those streams. On the Jordan in particular a 6'3" that you already have will fish great at Section 13 creek and in the brookie water and the Tricos at the discharge of the hatchery above that. But you will appreciate the length of the 7' 6" at Werner and State. Then on the Pigeon it will be back to the 6' 3" as you go north of the forestry headquarters - the West Lost lake area. And if you haven't done it. The midge will be a great adventure on 7 Mile creek for the spawning coasters. Just make sure you get the penthouse campsite at 12 mile campgrounds. (Wayne Cattanach)

I would take Wayne's recommendations to heart he lives in the area, as far as tapers go, look into some of Wayne's tapers, I have built his 7' 4 wt and a Sir D. which is an adaptation of his 7' 4 wt. Also built his 6'3" 4 wt, mine fishes great with a DT 4 silk line. His book has his tapers as well as being available on line. (Pete Van Schaack)

Payne 201. (Steve Weiss)